OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0DD5

Hybrid/EV Battery Cell Balancing Circuit K Stuck On

P0DD5 tells that circuit K is discharging its cells without a balancing request. Ford's 2016 hybrid OBD summary links the code to the BECM start-up check: before the contactors close it looks at the six cells of the circuit for 100 ms and fails it when one of them is more than 75 mV away from the average, confirmed on a second power cycle. A switch that conducts by itself can also be caught directly: in Toshiba patent US20130026994A1 the balancing switch is held off while a comparator watches the nodes on both sides of it; if one side sinks below the other, the switch is judged short-circuited. Apart from charge loss, the shorted path heats its resistor all the time. Inactive case: P0DD6.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberD / D5

Possible causes

  • Shorted balancing switch of group K high
  • Heat damage or contamination bridging the balancing path of K on the board medium
  • Driver stage of the monitoring chip holding channel K on low

Symptoms

  • Check engine light at start-up
  • Group K drops faster than the other cells while parked
  • Locally higher battery module temperature

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0DD5

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication