OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0DCE

Hybrid/EV Battery Cell Balancing Circuit I Stuck Off

P0DCE means the bleed path of group I does not respond to a balancing request. Ford lists it in the 2019 OBD summary for its full and plug-in hybrids, where the BECM discharges only the highest cells to match the rest and runs this check for 100 ms at power-up before the contactors close. Because the code concerns a switch that never conducts, nothing happens suddenly while driving. The penalty grows from charge to charge: the Intersil application note AN141 explains that in a series string the unbalanced cells hit full charge before the others and the weakest cell then limits what the pack can deliver. For a plug-in that means less electric range. The fault has to be found under CARB's hybrid rules. The stuck-on opposite is P0DCD.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberD / CE

Possible causes

  • Open bleed resistor in circuit I high
  • Balancing switch of group I that no longer closes medium
  • Cell tap of group I loose at the busbar low

Symptoms

  • Electric range decreases over many charging cycles
  • Cells of group I highest at the end of charging
  • Check engine light without noticeable effect while driving

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0DCE

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication