OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0DCB

Hybrid/EV Battery Cell Balancing Circuit H Range/Performance

P0DCB is raised when circuit H works electrically but the result of a balancing run does not match the plan. Ford's patent US9145064B2 shows how such a plan can be made: from each cell's capacity surplus and the pack charge current the controller computes how long that cell's resistor must stay active during charging so that all cells reach the target together. If group H still stands apart when that time has passed, the outcome is implausible, whether because of a resistor that drifted, a cell whose capacity changed or wrong estimates. A public maker document for P0DCB was not found; Volvo cures the F counterpart P0DC3 with BECM software. The CARB requirement is that intended cell voltages be maintained. Circuit fault: P0DC8.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberD / CB

Possible causes

  • Wrong capacity or state-of-charge estimate for the cells of group H medium
  • Battery controller software (update first, as Volvo does for P0DC3) medium
  • Bleed resistor of H drifted from its nominal value low

Symptoms

  • Check engine light, often only after charging sessions
  • Group H remains out of line after a full charge
  • Fluctuating range estimate

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0DCB

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication