P0DC8
Hybrid/EV Battery Cell Balancing Circuit H
P0DC8 covers an electrical fault of balancing circuit H. Audi's bulletin 93 17 04 for the 2016 A3 e-tron lists P0DC800 as the last of its circuit codes; no letter beyond H appears there, which suggests eight circuits in that pack. Since the fix was software that let CAN communication begin on time, the entry can also stem from the controller not hearing its cell electronics early enough. GM's eAssist table 13OBDG05C shows the same idea under its own codes: losing LIN contact with a balance processor (P1B34, P1B35) counts as a fault after 7 of 10 checks every 200 ms and is rated Type B. California makes this supervision mandatory for hybrid OBD. Stuck and plausibility faults of H use P0DC9 to P0DCB.
Possible causes
- Cell electronics not answering in time after wake-up (Audi software fix) high
- Damaged internal bus or supply wiring to the monitoring board of group H medium
- Open bleed path or lead in circuit H low
Symptoms
- Charging not possible at times
- Hybrid battery warning and check engine light
- Fault returns after clearing until software is updated
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0DC8
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.