OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0DC7

Hybrid/EV Battery Cell Balancing Circuit G Range/Performance

P0DC7 means circuit G switches but its effect on the cells does not fit the controller's model. The code is not tied to passive bleeding. Ford's patent application US20120293129A1 describes active balancing, where charge taken from the highest cell is moved to weaker ones, for example by a switched capacitor or a flyback transformer, and the transfer time depends on the gap between highest and lowest cell. In such a design a weak converter or worn capacitor shows up as a correction that falls short, not as an open circuit. Public documentation of P0DC7 by a maker could not be found; Volvo's bulletins for the neighbouring P0DC3 point to software first. CARB wants the balancing system to keep the desired cell voltages. Electrical fault: P0DC4.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberD / C7

Possible causes

  • Controller software with too tight plausibility limits medium
  • Weak transfer stage in active balancing (capacitor or transformer aged) medium
  • Cells of group G aged so that they react differently to correction low

Symptoms

  • Check engine light with hybrid system message
  • Cell spread in group G does not shrink after balancing
  • Usable battery capacity slightly reduced

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0DC7

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication