P0DC3
Hybrid/EV Battery Cell Balancing Circuit F Range/Performance
P0DC3 is the plausibility code for balancing circuit F, and Volvo is a documented user. On the SPA Twin Engine plug-in hybrids (XC90, XC60, S90, V90, model years 2016-2019) the BECM stores P0DC300 as an intermittent fault, listed alongside the range/performance codes of circuits A to E. Technical Journal 33931.3.0 of 2018 links them to BECM software released in week 18w17, which could make the displayed electric range fluctuate or drop unreasonably; improved software was the remedy. The later version 33931.6.0 adds a software product and sometimes a 12 V reset, about 20 minutes disconnected. Before suspecting cells, check the software level. Pure circuit faults of group F are P0DC0, stuck states P0DC1 and P0DC2.
Possible causes
- BECM software version with faulty balancing evaluation (Volvo TJ 33931) high
- Cells of group F with changed capacity respond differently to bleeding medium
- Bleed resistor value drifted so the balancing current is off target low
Symptoms
- Displayed electric range fluctuates or is unreasonably low
- Combustion engine runs more often than expected in hybrid mode
- Check engine light, fault often stored as intermittent
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0DC3
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.