OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0DBE

Hybrid/EV Battery Cell Balancing Circuit E Stuck Off

P0DBE means circuit E does nothing when told to bleed. The LaunchPoint patent US8598840B2 describes reading the cells while a planned bleed phase is running and treating a balancing side that shows no effect as faulted; this is the logic behind a stuck-off verdict. That patent also keeps a second balancing path in reserve, a reminder that some designs can carry on with reduced function. For the driver the code is mostly a long-term matter: group E stays high, charging ends sooner and capacity seems to fade. CARB 13 CCR 1968.2 asks for detection of such faults. Ford has carried P0DBE since its 2014 hybrid OBD summary, where a deviation above 75 mV within the six-cell circuit E must recur on two consecutive power-ups.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberD / BE

Possible causes

  • Bleed resistor of circuit E open high
  • Balancing transistor of circuit E does not turn on medium
  • Enable signal for group E not reaching the module low

Symptoms

  • MIL and battery warning
  • Apparent loss of capacity over weeks

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0DBE

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication