P0DBC
Hybrid/EV Battery Cell Balancing Circuit E
P0DBC is set for an electrical fault in the fifth balancing channel, E: the controller cannot trust the path through which group E would be bled, because a lead, switch or resistor reads open, shorted or out of range. The floating-capacitor method in LG Chem's US20110285539A1 is one way to test that path without loading the cells: charge, discharge through the balancing circuit, then compare the residual voltage with a limit. CARB 13 CCR 1968.2 requires the balancing parts of a hybrid to be monitored. In bulletin 93 17 04 from Audi, covering the A3 e-tron of model year 2016, P0DBC00 appears with the circuit codes of A to H; late CAN start-up was the cause, removed by software for the battery controller at address 008C.
Possible causes
- Open or shorted balancing lead in group E high
- Monitoring chip responsible for group E faulty medium
- Module connector of group E loose or corroded low
Symptoms
- MIL and battery warning
- Electric drive possibly restricted
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0DBC
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.