P0DBB
Hybrid/EV Battery Cell Balancing Circuit D Range/Performance
For P0DBB the controller judges the effect of balancing in circuit D as implausible. A clear reference is GM's eAssist key-off test for a related code: engaging the bleed load has to pull the cell at least 0.1 V away from its rest value. A result outside the expected window, even with intact wiring, is what a performance code captures. Passive balancing turns excess charge into heat, as the Wikipedia article on battery balancing outlines, so a weak resistor or a cell with changed internal resistance shifts the outcome. Volvo documents P0DBB00 for the BECM of its SPA Twin Engine models; Technical Journal 33931.3.0 traces it to software from week 18w17 and prescribes improved BECM software.
Possible causes
- Cell in group D with changed internal resistance or capacity medium
- Plausibility limits in the controller software too tight medium
- Bleed resistor of circuit D drifted low
Symptoms
- MIL without obvious driving symptoms
- Cell spread in group D persisting after long charging
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0DBB
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.