P0DB7
Hybrid/EV Battery Cell Balancing Circuit C Range/Performance
P0DB7 covers a circuit C that works electrically but whose outcome does not add up. A typical trigger is a cell in group C that needs trimming far more often or far less often than its neighbours. Southwest Electronic Energy's patent US9097774B2 counts balancing events per cell and flags one whose count runs away, because that hints at an internal short. So this code can point at the cells as well as at the circuit. CARB 13 CCR 1968.2 requires the system to keep the cell voltages it aims for. Volvo lists P0DB700 as an intermittent BECM fault on its 2016-2019 SPA plug-in hybrids; Technical Journal 33931.6.0 ties it, combined with charging voltage or communication codes, to a BECM software product.
Possible causes
- Cell in group C with rising self-discharge or an internal short medium
- Controller software with unsuitable plausibility limits medium
- Bleed resistor of circuit C out of tolerance low
Symptoms
- MIL, often with no other immediate effect
- One cell in group C repeatedly lower than the rest
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0DB7
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.