P0DB5
Hybrid/EV Battery Cell Balancing Circuit C Stuck On
Circuit C stuck on (P0DB5) means the cells of group C bleed energy permanently, also with the car switched off. Designers guard against exactly this: the LaunchPoint patent US8598840B2 lets every balance enable expire on a timer unless the central controller renews it, so a lost command cannot leave a switch on. When the hardware itself fails closed, that guard does not help and the controller can only spot the falling voltage or the mismatch between command and switch state. Over a few days the group C cells can drop far enough to trigger low cell voltage codes. Ford's 2017 hybrid OBD summary tests circuit C in a 100 ms window each time the car wakes, contactors still open, and sets P0DB5 if one of its six cells is more than 75 mV off the average.
Possible causes
- Balancing transistor in circuit C failed closed high
- Enable or watchdog logic of the module not releasing the switch medium
- Leakage path on the module board low
Symptoms
- MIL with battery warning, often after standing
- Low cell voltage codes in group C as a follow-up
- Electric range dropping
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0DB5
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.