P0DB4
Hybrid/EV Battery Cell Balancing Circuit C
P0DB4 belongs to the third balancing channel, C, and points to its hardware: an interrupted or shorted lead, a failed switch or a monitoring chip reporting nonsense for that cell group. A common test method sits in LG Chem's EP2730933A1, where a diagnosis resistor between cell and balancing circuit lets the controller see a defined voltage step each time the circuit is toggled; a missing or wrong step betrays the fault. Since sense and balancing leads often share pins, a sense-lead problem can show up here as well. For hybrids, CARB 13 CCR 1968.2 makes watching these parts mandatory. Audi records P0DB400 on the 2016 A3 e-tron; bulletin 93 17 04 links it to software that began CAN traffic late, so a reflash comes before any hardware work.
Possible causes
- Fault in a lead shared by voltage sensing and balancing in group C high
- Cell monitoring chip of group C defective medium
- Corroded module connector after water ingress low
Symptoms
- MIL with battery or hybrid warning
- Further cell voltage codes stored alongside
- Electric operation possibly reduced
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0DB4
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.