P0DB0
Hybrid/EV Battery Cell Balancing Circuit B
P0DB0 flags an electrical defect in the second balancing circuit, B. The battery controller finds an open, short or implausible voltage on the switch, resistor or lead serving that cell group, independent of whether balancing would be needed right now. One way to test this hardware is shown in LG Chem's patent US20110285539A1: a floating capacitor is charged to the cell voltage and then drained via the bleed path, and a high leftover voltage marks the circuit as faulty. CARB 13 CCR 1968.2 requires functional monitoring of these parts on hybrids. Audi lists P0DB000 in bulletin 2046556, written for the 2016 A3 e-tron, next to the other circuit codes; there it came with intermittent charging refusal and was fixed by software for J840 and JX1.
Possible causes
- Damaged balancing/sense lead or connector of cell group B high
- Cell monitoring chip or controller of group B defective medium
- Short 12 V supply dropout during service work low
Symptoms
- Battery system warning and MIL
- Electric drive or assistance possibly limited
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0DB0
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.