P0DAF
Hybrid/EV Battery Cell Balancing Circuit A Range/Performance
P0DAF is a plausibility code: circuit A switches and is electrically intact, but the effect on the cell voltages does not match what the controller expects. FCA is the visible user. Ram 1500 pickups with the 48 V eTorque system (2019-2024, bulletin 08-030-24 and its yearly versions) list P0DAF among the MIL codes fixed by new BPCM software. The 2026 Jeep Cherokee 1.6 hybrid (bulletin 08-186-26) logs P0DAF-00 together with low cell voltage P0DE6; the car may not start or switch off, and the update improves the robustness of the P0DAF check. So a software update is the first step before touching hardware. Pure circuit faults are P0DAC, stuck states P0DAD and P0DAE.
Possible causes
- Battery pack control module software with an oversensitive check (FCA bulletins 08-030-24, 08-186-26) high
- Weak or deeply discharged cells that respond differently to balancing, e.g. after cold cranking medium
- Bleed resistor or switch of circuit A with changed resistance low
Symptoms
- MIL on, often together with other battery codes
- Vehicle may not start or cannot be switched off (Jeep Cherokee hybrid)
- Reduced mild hybrid assistance
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0DAF
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.