OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0DAD

Hybrid/EV Battery Cell Balancing Circuit A Stuck On

P0DAD means balancing circuit A keeps draining its cells although the controller has not asked for it: the bleed switch is stuck closed and the resistor keeps pulling those cells down. Ford uses the code in the BECM of its hybrids; the 2019 OBD summary gives each of 14 circuits six cells and, at key-on with the contactors still open, rates a circuit faulty when one of its cells departs from the mean for 0.1 s by over 75 mV. Toshiba's patent US20130026994A1 detects such a shorted balancing switch with a comparator. Left alone, the affected cells sink below the rest, particularly while the car is parked, and the usable pack window shrinks. Which cells form group A is up to the maker.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberD / AD

Possible causes

  • Balancing transistor of circuit A shorted (fails closed) high
  • Monitoring chip or its drive output keeps the switch enabled medium
  • Controller software leaving a balancing request active low

Symptoms

  • Hybrid or EV battery warning with the MIL
  • Cells of one group noticeably lower after the car has been parked
  • Range or electric assistance decreasing over days

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0DAD

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication