OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0DA9

Hybrid/EV Battery Voltage/Drive Motor B Inverter Voltage Correlation

P0DA9 is the motor B counterpart of P0DA8: the controller compares traction battery voltage with the voltage seen at the inverter of drive motor B, typically the rear motor, and logs the code when the two drift apart with the contactors closed. No manufacturer documents P0DA9 publicly. Denso describes the underlying test, a battery sensor and an inverter sensor checked against a permitted difference, in the background of patent US9819293B2. Mitsubishi runs a closely related check on the 2023 Outlander PHEV but compares the rear inverter with the capacitor voltages of its power electronics and reports it as P0DA4 at 100 V for 0.2 s. A mismatch may come from either sensor, from a contactor or cable with high resistance, or from the inverter itself. CARB requires hybrid systems to monitor electric motor performance.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberD / A9

Possible causes

  • Voltage sensing in the motor B inverter drifting medium
  • Battery pack voltage measurement in the battery management faulty medium
  • High resistance in a contactor, fuse or cable between battery and rear inverter low

Symptoms

  • MIL and hybrid system warning
  • Rear electric drive limited or disabled

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0DA9

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication