P0DA7
Drive Motor B Inverter Voltage Sensor A Circuit Intermittent/Erratic
P0DA7 is meant for a rear inverter voltage reading that jitters or drops out briefly without staying out of range long enough for P0DA5 or P0DA6. No manufacturer documents this code publicly. The neighbouring Mitsubishi checks give the time scale: the rear motor unit of the Outlander PHEV needs 0.3 s outside its window for the low or high fault, and the 2023 plausibility test waits 0.2 s, so faster glitches call for a separate detector. Denso's patent US9819293B2 compares the measured inverter input voltage with a value estimated from the motor control loop, an approach that also exposes an unsteady sensor. Likely triggers are a loose low-voltage plug at the inverter, a high-voltage terminal with poor contact, or sensing electronics that fail with heat. The hybrid warning may come and go.
Possible causes
- Low-voltage connector at the rear inverter with intermittent contact high
- High-voltage terminal at the rear inverter not tightened properly medium
- Voltage sensing electronics failing with temperature or vibration low
Symptoms
- Hybrid warning that appears and clears
- Brief loss of rear drive power
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0DA7
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 4 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.