P0D9A
Battery Charger Coupler Temperature Sensor A Circuit Range/Performance
P0D9A covers a coupler temperature signal that is electrically valid but does not make sense, for example a rise that the charging current cannot explain or a value that disagrees with the rest of the system. GM's preliminary information PIT5904 lists it, with P298C and P0E5F, for the 2022 GMC Hummer EV and BrightDrop EV600: the MIL comes on and charging fails or aborts, often at heavily used public or dealer stations. GM suspects software or oversized and damaged terminals in the cable plug, advises clearing codes and trying another station, and notes that the test only re-runs after about 10 minutes of driving above 2 mph. Mercedes stores it as P0D9A97 (sensor malfunction) in the smart's 22 kW charger. Unlike P0D99, a worn station plug can trigger it on a healthy car; true overheating is P0E5F.
Possible causes
- Oversized or damaged terminals in the charging station plug (GM) high
- Charging software calibration, update pending or available (GM) medium
- Raised contact resistance at the vehicle inlet pins medium
- Temperature element drifting out of its characteristic low
Symptoms
- MIL on (GM)
- Charging fails or stops, often at busy public stations
- Code returns only after a drive of about 10 minutes (GM)
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P0D9A
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.