P0D99
Battery Charger Coupler Temperature Sensor A Circuit
P0D99 flags a general electrical fault in temperature sensor A of the charging inlet, the element that tells the car how hot the power contacts are. At high current, contact resistance heats the pins; the reading lets the car throttle or stop charging (TE Connectivity, US10960781B2). Inlet suppliers fit resistive sensors: Phoenix Contact strings PTC elements along the AC pins and puts a Pt 1000 on each DC pin, with shutdown above +90 °C at the contact. For the third-generation smart electric drive with 22 kW charger, Mercedes defines P0D9900 as an electrical fault of the inlet contact temperature sensor; bulletin LI54.10-P-067823 traces it, like neighbouring sensor codes, to loose low-voltage plugs at the charger. Without a usable reading, charging is refused or limited. Implausible, low and high readings are P0D9A–P0D9C.
Possible causes
- Loose low-voltage connector at the on-board charger (smart) high
- Damaged sensor wiring between inlet and charger medium
- Temperature element in the inlet failed (usually replaced with the inlet harness) medium
- Evaluation input in the charger module defective low
Symptoms
- High-voltage battery cannot be charged
- Charging only at reduced power
- Charging system fault message
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P0D99
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.