OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0D8E

Battery Charger Coupler Status Indicator Control Circuit C High

P0D8E is recorded when channel C of the charge port status indicator shows a high level that the driver did not command, a short to a supply voltage or a driver that no longer turns off. Following the pattern GM published for the Volt's charge-status LED, this is checked while the output is meant to be inactive. No manufacturer documents P0D8E publicly. What the owner sees depends on what C signals on that vehicle: in multi-colour designs, where each LED colour carries a meaning such as fault, charging or complete, a constantly lit C channel can display a fault or a finished charge that is not real. Look for chafing where the harness passes the flap mechanism, a connector bridged by water or a stuck output stage. Charging is unaffected. P0D8C and P0D8D are the open and low faults of channel C.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberD / 8E

Possible causes

  • Chafed channel C wire touching a supply wire at the flap mechanism high
  • Connector bridged by water medium
  • Output stage in the control module stuck on low

Symptoms

  • Colour or segment C lit permanently
  • Port shows a fault or complete status that is not real

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P0D8E

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication