P0D8C
Battery Charger Coupler Status Indicator Control Circuit C/Open
P0D8C points to an open third channel, C, of the charge port status indicator. Only systems with at least three separately driven lighting outputs use it, for instance one per colour in an RGB-type port lamp of the kind a supplier patent describes, or individual ring segments. No manufacturer documents the code publicly. A common trigger is work at the inlet: after body repair, a flap or inlet replacement or paint work, the lamp connector may be left unplugged or a pin pushed back in its housing. On integrated inlets, where the LEDs sit inside the socket assembly, a failed LED can mean replacing the whole inlet. If A and B report open at the same time, look at the common connector first. The port loses one colour or segment; charging continues unaffected.
Possible causes
- Lamp connector left unplugged or pin pushed back after work at the inlet high
- Failed LED of channel C (on integrated inlets the whole inlet assembly) medium
- Broken channel C wire medium
Symptoms
- One colour or segment of the port lighting missing
- Fault appears after body or inlet repair
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P0D8C
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.