P0D8B
Battery Charger Coupler Status Indicator Control Circuit B High
P0D8B is set when the B line of the charge port status indicator carries voltage while its driver has it switched off. The detection logic mirrors what GM published for the Volt's charge-status LED (P0D2C): a short to battery is looked for during the off phase. No manufacturer documents P0D8B itself. In everyday use the consequence can be more confusing than a dark lamp: segment or colour B stays lit, so the port may display a charge level or state that does not match reality, which matters when owners rely on the light to check progress. Insulation damage where the harness bends at the flap, a connector bridged by moisture or a stuck driver output are the main candidates. Charging is unaffected. P0D89 and P0D8A are the open and low faults of channel B.
Possible causes
- Insulation damage where the harness bends at the flap, contact with a supply wire high
- Connector bridged by moisture medium
- Driver output in the control module stuck on low
Symptoms
- Colour or segment B stays lit
- Displayed charge level does not match the actual state
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P0D8B
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.