P0D8A
Battery Charger Coupler Status Indicator Control Circuit B Low
P0D8A means channel B of the charge port status indicator is held at ground level when it ought to rise, i.e. a short to ground on the B line or inside its lamp. The inlet is one of the most exposed electrical points of the car: rain, car-wash water and road salt reach it every time the flap opens, so corroded or wet contacts that bridge to ground are a frequent finding. No manufacturer documents P0D8A publicly; the closest published logic is GM's P0D2C test on the Volt, which checks for a grounded LED line while the lamp is commanded on and sets a Type B fault. The channel normally switches off to protect its driver, so the related colour or segment remains dark. Charging is not restricted. P0D89 covers an open B circuit, P0D8B a short to voltage.
Possible causes
- Wet or corroded contacts at the inlet lighting bridging to ground high
- Channel B wire chafed through to body ground medium
- Shorted LED or segment of channel B low
Symptoms
- Colour or segment B stays dark
- Charging status only partly shown
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P0D8A
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.