P0D86
Battery Charger Coupler Status Indicator Control Circuit A/Open
Many plug-in vehicles light up the charge inlet to show whether the plug is recognised, charging is running or a fault exists; a Ford summary describes a four-segment ring, a supplier patent multi-coloured LEDs at the port. P0D86 says the control module driving channel A of this indicator finds no continuity in that circuit. Which colour or segment A stands for is up to the manufacturer, and none documents this code publicly. GM's Volt watched its single charge-status LED under P0D2C instead and caught an open line while the LED was commanded off, Type B. Typical reasons are an unplugged lamp connector, a broken wire near the flap or a burnt-out LED. Charging itself keeps working; only the status display at the port is missing. P0D87 and P0D88 are the low and high faults of the same channel.
Possible causes
- Indicator connector at the charge inlet unplugged or not latched high
- Broken wire in the harness near the charge port flap medium
- Failed LED or lamp element of channel A medium
Symptoms
- Part of the charge port lighting stays dark
- Charging status not visible at the inlet, charging itself works
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P0D86
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.