P0D85
Battery Charging Output Voltage Too High
P0D85 means the charger is putting more voltage onto the traction battery side than it should. In Ford's 2019 plug-in hybrid OBD summary the battery controller compares the charger's output voltage with its own request and flags a surplus of 20.82 V lasting 20 seconds. Mitsubishi's 2022 Outlander PHEV judges a change of output voltage of more than 450 V while the PHEV-ECU allows charging, stops the charge and points to the charger/DC-DC unit after checking the high-voltage fuse and the P/N lines; the 2023 list lights the hybrid warning and the MIL. Porsche reuses P0D8500 on 911 (992) petrol models for a battery voltage judged too high at cold start, fixed by DME software (TI 203/23). Related: P0D20, P0D21 and the sensor code P0D4F.
Possible causes
- Voltage control fault inside the on-board charger/DC-DC unit high
- Open high-voltage fuse or P/N line between charger and battery (output unloaded) medium
- Control unit software error (e.g. Porsche DME, reprogramming) low
Symptoms
- Charging stops
- Hybrid system warning and check engine light
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0D85
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.