P0D83
Battery Charger Input Circuit High
P0D83 is set when the charger reads its input circuit above the highest electrically valid level, i.e. a reading the measuring stage could not produce from a healthy mains connection. No manufacturer publishes a threshold for it. Likely culprits are a sense line shorted to a voltage source, a damaged inlet whose pins bridge to one another, or a measuring channel in the charger that has drifted or failed. P0D28 should be kept apart: it rates a real mains voltage above what the charger accepts, whereas P0D83 doubts the signal itself; P0D40 is the matching fault of the separate input voltage sensor. Because the charger cannot trust the reading, it normally refuses to convert power, so the battery stays uncharged while driving is unaffected.
Possible causes
- Input sense line shorted to a voltage source medium
- Damaged charge inlet with bridged or burnt contacts medium
- Drifted or failed measuring channel in the charger medium
Symptoms
- Charger refuses to charge
- Charging fault message
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0D83
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.