P0D81
Battery Charger Input Circuit Range/Performance
P0D81 is the plausibility code for the charger's AC input: a signal is present and electrically valid, yet contradicts the stage the charging sequence has reached. No manufacturer documents this code publicly with thresholds. A Ford patent on charger-to-EVSE detection outlines the kind of check meant here: the charger watches for line voltage while its S2 switch is still commanded open, debounces the condition and may only report it after it recurs over several charge cycles. Such a mismatch typically comes from a station that energises its contacts too early. CARB does not require faults caused by the off-board supply to be told apart, so the code often points at the EVSE rather than the car. P0D80 covers missing input, P0D82 and P0D83 electrical out-of-range values, P0D90 a wrong frequency.
Possible causes
- Charging station switches AC on before the vehicle has closed S2 (faulty or welded EVSE relay) high
- Charger's input voltage measurement reports an implausible value medium
- Improvised supply that feeds the inlet directly without a proper EVSE low
Symptoms
- Charging does not start or stops shortly after plugging in
- Charging fault message
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P0D81
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.