OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0D7D

A/C Compressor Motor Phase V Current High

P0D7D marks a phase V current reading of the electric A/C compressor that is far negative while the motor should be idle. GM's first-generation Volt and the 2016 ELR set it at −68 A or less, judged in 30 of 60 samples every 50 ms whenever the speed request is zero, as Type B with MIL after two trips. A 12 V reset is needed before the diagnostic can report a pass again. Because the check runs only with the motor stopped, it catches a drifting or failed current sensor rather than an operating overload; running overcurrent is P0D6F. Expect the climate control to lose cooling, with battery cooling affected on vehicles that share the refrigerant circuit. The counterpart on the same phase is P0D7C.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberD / 7D

Possible causes

  • Phase V current sensor reading negative at standstill high
  • Fault in the inverter's current evaluation medium

Symptoms

  • Check engine light after two trips
  • No cooling from the air conditioning
  • Battery cooling via refrigerant may be limited

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0D7D

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication