P0D79
A/C Compressor Control Module Output Driver Temperature Sensor Circuit Intermittent/Erratic
P0D79 marks an erratic signal from the output driver temperature sensor, the sensor that guards the compressor's power transistors: values flicker or drop out briefly instead of staying wrong. No manufacturer publishes set criteria. GM's 2019 Volt table lists P0D79 next to P0D77 and P0D78 as an IGBT-sensor circuit fault that suspends the plausibility checks, which shows the code is in use, but without thresholds. A Hyundai patent on temperature sensors for power switches names loose connectors, electrical noise, board defects and cold solder joints as typical origins of such unstable readings. Because the compressor can no longer trust its overheat protection, it may cut out repeatedly. CARB requires thermal-management inputs to be checked for circuit faults.
Possible causes
- Cold or cracked solder joint at the IGBT sensor medium
- Loose low-voltage connector or ground at the compressor medium
- Switching noise from the inverter coupling into the sensor signal low
Symptoms
- Air conditioning cuts out repeatedly
- Code appears sporadically
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0D79
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.