OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0D71

A/C Compressor Control Module Internal Temperature Sensor A Performance

P0D71 is a plausibility test for the compressor control module's internal (CPU) temperature sensor: after a long rest, every temperature in the compressor should be close to its surroundings. GM's 2011 Volt compares it with intake air and with the output-stage sensor and fails above 6 °C in 35 of 40 samples at 250 ms. The 2016 Volt uses more than 22 °C against outside air and the IGBT sensor once the compressor has been off for over 7,200 s, the 2016 ELR 10 °C, and the 2019 Volt 22 °C in 8 of 10 s; outside air has to be above −7 °C. All are Type B with MIL after two trips. A drifting sensor, a faulty reference sensor or a compressor still warm from use can trigger it; range faults are P0D72 and P0D73.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberD / 71

Possible causes

  • Drifting internal temperature sensor in the compressor electronics high
  • Outside air, intake air or IGBT sensor used for comparison is wrong medium
  • Compressor not fully cooled down when the test ran low

Symptoms

  • Check engine light after two trips
  • Usually no noticeable change in A/C operation

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0D71

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication