OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0D70

A/C Compressor Control Module Internal Temperature Sensor A Circuit

The control electronics inside an electric A/C compressor carry a temperature sensor on the processor board, called internal sensor A; the compressor uses it to protect itself and reports the value to the vehicle. P0D70 is the general circuit code for it: the value is missing or invalid without a defined low or high reading. No manufacturer documents P0D70 publicly. GM's Volt and ELR tables only use P0D71 (comparison with other temperatures), P0D72 (below −40 °C) and P0D73 (above 150 or 274 °C) for this sensor. A Hyundai patent on temperature sensors of power electronics lists open connectors, shorts, noise and board faults as the usual origins. As the sensor sits on the module's circuit board, a confirmed fault usually means a new compressor assembly; cooling may be reduced or stop.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberD / 70

Possible causes

  • Temperature sensor or its circuit on the compressor board failed high
  • Value not transmitted correctly over the data link medium
  • Unstable 12 V supply or ground of the compressor electronics low

Symptoms

  • Air conditioning weak or off
  • Battery cooling via refrigerant may be limited
  • Warning depending on the vehicle

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0D70

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication