OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0D6B

A/C Compressor Motor Voltage Sensor A Circuit Low

P0D6B reports that the high-voltage input reading of the electric A/C compressor sits below the plausible range. GM's first-generation Volt (2011–2015) and the 2016 ELR set it at 190 V or less in 30 of 60 samples at 50 ms, checked only with the contactors closed for over a second and fault-free. The 2016–2019 Volt uses below 27.75 V, judged by the compressor and passed on over GMLAN (2019: 4 of 5 s); all are Type B, MIL after two trips. Mitsubishi's Outlander PHEV flags under 205 V for 2 s while the battery shows 220 to 400 V; the 2019/2022 page header mislabels it as high, but the threshold is a low one, and the 2023 list calls it Circuit Low with MIL only. Suspects: compressor inverter, CAN link, hybrid ECU. A real supply loss is P0D6D.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberD / 6B

Possible causes

  • Voltage measurement in the compressor inverter reads too low high
  • Faulty data link between compressor and hybrid controller (named by Mitsubishi) medium
  • Hybrid or vehicle controller evaluates the value incorrectly low

Symptoms

  • Check engine light after two trips (GM) or immediately (Mitsubishi 2023)
  • Air conditioning stops cooling
  • Battery cooling via refrigerant may be restricted

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0D6B

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication