P0D6A
A/C Compressor Motor Voltage Sensor A Circuit High
P0D6A means the electric A/C compressor reports an input voltage higher than the high-voltage system can actually deliver. GM's 2011 Volt table sets it at 450 V or more (30 of 60 samples at 50 ms); the 2016 and 2019 Volt tables use more than 527.25 V, judged by the compressor itself and sent over the data bus (2019: 4 of 5 s). Both are Type B, MIL after two trips. Mitsubishi's Outlander PHEV flags it when the compressor reads above 415 V for 2 s while the battery shows 220 to 400 V; its 2019 and 2022 manuals label the code inconsistently as low and high, but the threshold is a high one. The 2023 model lights the MIL. A real overvoltage is unlikely, so the compressor's measurement or the hybrid controller is the main suspect. The low end is P0D6B, plausibility P0D69.
Possible causes
- Voltage measurement in the compressor inverter reading too high high
- Electric compressor assembly defective medium
- Hybrid controller or data link fault low
Symptoms
- Check engine light
- Air conditioning stops cooling
- Driving otherwise normal
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0D6A
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 1 warning for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.
Sources
- gsi.ext.gm.com/gmspo/mode6/pdf/2011/11OBDG01 HYBRID Diagnostics.pdf
- gsi.ext.gm.com/gmspo/mode6/pdf/2019/19OBDG01 Hybrid Diagnostics.pdf
- mitsubishitechinfo.com/data/REEV/2019/55/HTML/M155403140001900USA.htm
- mitsubishitechinfo.com/data/REEV22/2022/55/HTML/M155403140001900USA.htm
- mitsubishitechinfo.com/data/DGE/2023/03/HTML/N503230070000900USA.htm