OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0D69

A/C Compressor Motor Voltage Sensor A Performance

P0D69 is a plausibility check: the high voltage that the electric A/C compressor measures at its input should match the traction battery voltage, since both see the same supply. GM's Volt sets it when the two differ by more than 15 V in the 2011 table (35 of 40 samples at 250 ms) and by more than 30 V in the 2016 and 2019 tables (8 of 10 s in 2019), each Type B with MIL after two trips and only with contactors closed and no battery voltage codes active. Mitsubishi's Outlander PHEV uses 20 V for 2 s, with the compressor reading 205 to 415 V, a battery above 15 °C and intake air above 0 °C; the 2023 model lights only the MIL for it. Usual causes are the compressor's internal measurement, the data link carrying its value, or the hybrid controller. Range faults are P0D6A and P0D6B.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberD / 69

Possible causes

  • Drifting high-voltage measurement inside the electric compressor high
  • Fault on the data bus that carries the compressor voltage value medium
  • Hybrid or vehicle controller misjudging the comparison low
  • Error in the battery voltage measurement used as reference low

Symptoms

  • Check engine light
  • Air conditioning weak or switched off
  • Often no other noticeable change

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0D69

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 2 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication