OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0D65

Hybrid/EV Battery Pack Cooling Fan Enable Circuit Low

P0D65 reports a short to ground on the enable output of the battery cooling fan: the line stays low even though the controller is trying to switch the fan on. GM's 2013 eAssist mild hybrid table 13OBDG05C detects it from the output driver's fault flag for the power pack fan, 20 failures in 25 samples at 250 ms, Type B. The later hybrid tables 16OBDG02 to 19OBDG02 test it with the enable commanded on: a voltage under 5.35 V at system voltage above 10.2 V counts, and 16 failures in 20 samples set the code, again Type B with MIL after two trips. A chafed wire touching the body or a shorted input inside the fan are the usual finds. The fan cannot start, so expect higher battery temperatures and possibly reduced electric support. Open circuit is P0D64, short to voltage P0D66.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberD / 65

Possible causes

  • Enable wire chafed and shorted to body ground high
  • Shorted enable input inside the fan electronics medium
  • Moisture or corrosion bridging the enable pin to ground low
  • Enable driver in the battery controller defective low

Symptoms

  • Check engine light or hybrid warning after two trips
  • Battery cooling fan never switches on
  • Engine runs more and electric assist drops in hot weather

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P0D65

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 3 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication