OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0D62

Hybrid/EV Battery Pack Cooling Fan 2 Sense Circuit High

P0D62 is set when the feedback of battery cooling fan 2 rises above its plausible maximum. Volkswagen gives the threshold for the 2014 Touareg Hybrid as a fan 2 feedback voltage above 3.45 V, mirroring P0BCA for fan 1. A real fan cannot drive the signal that high, so the cause is electrical: the feedback wire touching a supply or another signal, a missing ground at the fan so the line floats up, or fan electronics stuck at their upper output. Check the ground and the harness routing before condemning the fan. The bottom end of the range is P0D61, while P0D60 covers a valid signal that disagrees with the command. With the speed information unusable, the controller cannot verify cooling and may restrict battery power.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberD / 62

Possible causes

  • Fan 2 feedback wire shorted to a supply or neighbouring signal high
  • Open ground at fan 2 letting the feedback line float high medium
  • Fan 2 electronics stuck at their upper feedback level medium
  • Feedback input of the battery control module defective low

Symptoms

  • Hybrid system warning or check engine light
  • Electric power limited when the battery gets warm
  • Fan 2 may still run normally

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P0D62

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication