OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0D60

Hybrid/EV Battery Pack Cooling Fan 2 Sense Range/Performance

P0D60 means the feedback of battery cooling fan 2 is electrically present but does not fit what the fan was told to do. Volkswagen documents it for the 2014 Touareg Hybrid: the battery controller reads the fan 2 feedback as a voltage and flags this code when it crosses a limit that moves with the commanded duty, somewhere between 1.37 and 3.43 V; fan 1 is judged the same way under P0BC8. Behind such a mismatch usually sits a fan that turns too slowly or too fast for its command, for example from a worn bearing, debris in the impeller or a blocked intake duct, less often a drifting feedback stage. The reading stays inside its valid window, which separates P0D60 from the hard faults P0D61 (low) and P0D62 (high). Battery temperatures may climb and the system can cut power to protect the pack.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberD / 60

Possible causes

  • Fan 2 runs off its commanded speed due to worn bearing or debris on the impeller high
  • Clogged intake grille, filter or duct of the battery cooling air medium
  • Drifting speed feedback stage in the fan electronics low
  • High resistance in the feedback or supply connection of fan 2 low

Symptoms

  • Hybrid system warning or check engine light
  • Fan noise that is louder, rougher or weaker than usual
  • Battery temperature rises faster and electric power is limited

Inspection / repair

  • Difficulty: medium
  • DIY: possible

What Pro shows you for P0D60

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 4 warnings for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication