P0D5F
Hybrid/EV Battery Pack Cooling Fan 2 Sense Circuit/Open
Where a traction battery is cooled by two fans, each one can report its actual speed back to the controller on a separate sense line. P0D5F is the general circuit code for that return path of fan 2: the line is open or delivers nothing the controller can evaluate. No manufacturer documents P0D5F publicly. Volkswagen's 2014 Touareg Hybrid reads the same fan 2 feedback as a voltage but only defines P0D60 to P0D62, and Toyota patents show why the signal matters: measured fan speed is compared with the speed the duty command should give. CARB requires electrical inputs of battery thermal management to be monitored. Fan 2 may keep turning, yet its operation can no longer be confirmed, so the pack may be protected by reduced power. Drive-side faults of fan 2 are P0A96 and its siblings; fan 1 feedback uses P0BC7 to P0BCB.
Possible causes
- Broken feedback wire or terminal pushed out at the fan 2 connector high
- Corroded or loose connector between fan 2 and the battery controller medium
- Speed signal output inside the fan 2 motor electronics failed medium
- Feedback input of the battery control module defective low
Symptoms
- Hybrid system warning or check engine light
- Reduced electric assist or charging power when the battery warms up
- Often no noticeable change while fan 2 still runs
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P0D5F
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.