P0D5D
Battery Charger Hybrid/EV System Discharge Time Too Short
P0D5D concerns the active discharge of the charger's high-voltage side after charging ends: the stored voltage collapses faster than the circuit design allows. No manufacturer documents P0D5D publicly; GM's Volt only publishes the opposite case P0D5E. Patent literature explains why a fast drop is suspicious too: a German application on high-voltage diagnostics describes detecting a discharge path that is permanently switched on, and a quick decay can equally point to lost capacitance or a faulty voltage reading. Safety is not at risk, since the voltage does fall below the touch-safe level, but the electronics may be degraded. CARB requires detection of charger faults that disable or limit charging. Charging may be refused until the fault is repaired.
Possible causes
- Discharge switch inside the charger stuck closed medium
- Link capacitor lost capacitance medium
- Charger voltage measurement reads falsely low medium
Symptoms
- Charging system warning after the end of charging
- Next charging session may not start
- No noticeable effect while driving
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0D5D
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.