P0D5A
Proximity Detection Circuit A Intermittent/Erratic
P0D5A points to a proximity signal on circuit A that flips between states or jumps erratically, so the vehicle sees the plug come and go although nobody touched it. No manufacturer documents P0D5A publicly. The function itself is laid down in SAE J1772: the plug-present contact tells the car when a connector is seated and when its latch button is pressed, which lets it stop drawing current before disconnection. An unstable signal can therefore cause charging to abort without reason or a drive lock that appears and vanishes. Mercedes' smart bulletin for the 22 kW charger shows the typical background: loose low-voltage contacts that act up only when parts are warm or cold. Hard faults are P0D58 and P0D59.
Possible causes
- Loose contact in the inlet or at the charger connector high
- Worn latch switch or contacts in the charging plug medium
- Moisture in the charge inlet low
Symptoms
- Charging aborts sporadically
- Plug status message appears and disappears
- Occasional refusal to drive off
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P0D5A
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.