P0D57
Proximity Detection Circuit A Range/Performance
P0D57 means the plug-present signal of proximity circuit A is electrically within limits but its value or behaviour does not fit the situation, for instance a level between the defined states for plugged, unplugged and latch pressed. FCA uses the code on the Chrysler Pacifica plug-in hybrid: bulletins 08-044-20 (2017) and 08-042-20 (2018) list P0D57 with control pilot codes P0CF3 and P0CF4 behind an illuminated MIL and cure it by reflashing the hybrid control processors HCP and AHCP. FCA publishes no thresholds. The J1772 proximity circuit relies on defined resistor steps, so worn inlet contacts or an off-standard charging cable can shift the reading. Hard short circuits are P0D58 and P0D59.
Possible causes
- Hybrid control software needs update (FCA HCP/AHCP) high
- Worn or contaminated proximity contact shifts the resistance medium
- Charging cable or adapter with off-standard proximity resistor low
Symptoms
- MIL on (FCA)
- Charging starts unreliably or not at all
- Plug status shown incorrectly
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for P0D57
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 1 warning for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.