P0D55
Battery Charger Hybrid/EV Battery Output Current Sensor Circuit Intermittent/Erratic
P0D55 describes an output current signal from the charger that flickers, jumps or briefly drops out rather than tracking the regulated charging current. No manufacturer documents P0D55 publicly. GM and Mitsubishi publish only fixed limits (P0D53 and P0D54) and, at Mitsubishi, a zero-point test (P0D52) for this sensor; a sudden step that returns to normal would not necessarily trip those. CARB's charger requirement for plug-in hybrids is the regulatory basis for monitoring the signal at all. Typical triggers are intermittent internal contacts, solder fatigue from heat cycles during charging, or electrical noise from the charger's switching stage. The likely result is charging that stops and restarts or finishes much later than expected.
Possible causes
- Intermittent contact in the current measuring path of the charger high
- Solder joints fatigued by charging heat cycles medium
- Switching noise coupling into the sensor signal low
Symptoms
- Charging pauses and resumes repeatedly
- Charging takes much longer than usual
- Occasional charging system warning
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0D55
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.