P0D50
Battery Charger Hybrid/EV Battery Output Voltage Sensor Circuit Intermittent/Erratic
P0D50 stands for an unsteady output voltage signal from the on-board charger: the value jumps or drops out briefly instead of following the slowly changing battery voltage. No manufacturer documents P0D50 publicly. GM and Mitsubishi only publish fixed limits for this sensor (P0D4E, P0D4F) and, at GM, a comparison with the battery voltage (P0D4D), so a dedicated check for signal spikes would be an additional layer. CARB lets such checks count as part of the circuit and rationality monitoring it requires for the plug-in charger. Loose internal contacts, failing solder joints or interference within the charger are the likely triggers. Charging may stop and restart repeatedly; driving is unaffected.
Possible causes
- Loose contact or cracked solder joint in the charger's measuring path high
- Electrical interference from the charger's power stage medium
- Ageing voltage sensing electronics in the charger medium
Symptoms
- Charging repeatedly interrupted
- Charge time noticeably longer than usual
- Sporadic charging system warning
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0D50
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.