P0D4D
Battery Charger Hybrid/EV Battery Output Voltage Sensor Circuit Range/Performance
P0D4D means the charger's output voltage reading is electrically valid but fails to match the rest of the system. GM's second-generation Volt (2016-2019 tables) compares it with the traction battery voltage while charging is ready: a gap of more than 30 V sets the code, in 2019 after 320 of 400 samples taken every 25 ms, as a Type B fault with MIL after two trips. GM issued engineering information PIE0828 for 2022-2023 Bolt EV and EUV cars showing the MIL with P0D4D, P0D4E and P0D4F, root cause still under investigation. Kia lists P0D4D in bulletin 298 for the 2023 Niro EV among codes that, if active, lead to replacement of the integrated charging unit. Hard signal faults are P0D4E and P0D4F.
Possible causes
- Output voltage measurement inside the charger drifted or inaccurate high
- Integrated charging unit failed (Kia ICCU, GM charger module) medium
- Reference value from the battery voltage measurement wrong low
Symptoms
- MIL on (GM Volt, Bolt)
- Slow AC charging or no AC charging
- Check electric vehicle system message (Kia)
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0D4D
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
- 2 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.