OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0D4C

Battery Charger Hybrid/EV Battery Output Voltage Sensor Circuit

P0D4C is the general circuit code for the sensor that reports the DC voltage the on-board charger delivers to the high-voltage traction battery. No manufacturer documents P0D4C publicly; GM (Volt, ELR) and Mitsubishi (Outlander PHEV) split electrical faults of this measurement into the low and high codes P0D4E and P0D4F instead, and GM's Volt checks plausibility with P0D4D. CARB requires plug-in hybrids to detect charger faults that stop or limit charging, which is why such a sensor is diagnosed at all. The code points to an open or otherwise unusable signal path, usually inside the charger itself. Driving normally remains possible, but AC charging is typically refused until the fault is cleared.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberD / 4C

Possible causes

  • Voltage sensing electronics inside the on-board charger failed high
  • Interrupted signal path or poor internal connection in the charger medium
  • Charger software fault, fixed by reprogramming low

Symptoms

  • Plug-in charging does not start or stops shortly after starting
  • Charging system warning in the instrument cluster
  • Vehicle can still be driven on stored energy or fuel

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0D4C

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication