P0D4B
Battery Charger 14 Volt Output Current Sensor Circuit Intermittent/Erratic
P0D4B covers an erratic or intermittent signal from the current sensor in the battery charger's 14 V output. No manufacturer documents it publicly; GM's Volt and ELR charger module uses only the low and high codes P0D49 and P0D4A for this measurement. As a Ford patent describes, such a charger-internal low-voltage stage can support the 12 V system during charging, so an unsteady current value may make the charger cut that stage in and out. CARB's comprehensive component requirements cover sporadic signal faults of inputs in general. Likely causes are loose connectors at the charger, internal contact problems or electrical interference; repair usually starts with the charger's low-voltage connections before the charger itself is replaced.
Possible causes
- Loose low-voltage connector or ground at the charger medium
- Intermittent contact in the charger's current sense circuit medium
- Electrical interference on the low-voltage network low
Symptoms
- Charging interrupts now and then
- 12 V battery voltage fluctuates while plugged in
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0D4B
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.