P0D42
Battery Charger 14 Volt Output Voltage Sensor Circuit
P0D42 is the circuit code for the sensor that measures voltage at the 14 V output of the battery charger, a low-voltage DC stage built into the on-board charger and distinct from the vehicle's main DC/DC converter. GM's charger module in the Volt and ELR has such an output and monitors its voltage with P0D43-P0D45, yet no manufacturer publishes P0D42 itself. A Ford patent explains the purpose of such a stage: a small converter inside the charger keeps the 12 V bus supplied during charging, so the main contactors and the large converter can stay off. CARB requires circuit checks on inputs of this kind. A fault can leave the 12 V side unsupported while plugged in or interrupt charging; driving is not directly affected.
Possible causes
- Open or shorted voltage sense circuit of the charger's low-voltage stage medium
- Poor 12 V or ground connection at the charger medium
- Failed on-board charger electronics low
Symptoms
- 12 V battery discharges while the car is plugged in
- Charging is interrupted
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0D42
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.