OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0D3F

Battery Charger A Input Voltage Sensor A Circuit Low

P0D3F reports that the charger's AC input voltage reading is too low. In the 2011-2014 Volt GM's charger module sets it when the AC peak stays below 90 V while AC is present (1.5 s in 2011, 5.5 s in 2014), Type A; the 2016-2019 Volt instead watches a duty-cycle signal at or below 8 %. GM bulletin PIC5803D links it to certain charging stations and to grid brown-outs during storms, 12-08-45-001A to electrical noise on household circuits, and PIT6353 to DC-only NACS adapters plugged into AC chargers on newer GM EVs. Mitsubishi's Outlander PHEV treats a sensor output under 0.474 V as a short to ground and stops charging. The opposite fault is P0D40. Check the supply and the charging equipment before replacing parts.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberD / 3F

Possible causes

  • Weak, interrupted or noisy AC supply (brown-out, shared circuit) high
  • DC-only adapter used on an AC charger (GM PIT6353) medium
  • Charger module software needs update (GM PIC5803D) medium
  • Voltage sensor signal shorted to ground in the charger low

Symptoms

  • Charging does not start or is interrupted
  • MIL on (GM)
  • Charge cord LEDs flash or the charge indicator changes colour repeatedly

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for P0D3F

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication