OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Powertrain generic / SAE

P0D3E

Battery Charger A Input Voltage Sensor A Circuit Range/Performance

P0D3E means the AC input voltage seen by the on-board charger does not agree with other information. GM uses it across generations: the 2011-2014 Volt charger module compares the AC peak voltage with two internal bulk voltage readings and sets a Type A fault when both differ by more than 34 V (59 V in 2014); the 2016 and 2019 Volt check the charger's duty-cycle report while driving and fail it outside 8-12 %, Type B. GM bulletins PIC5803B to D tie P0D3E to interrupted charging with certain charging stations and fix it with new BCCM software. Mitsubishi's Outlander PHEV flags an input voltage reading of 25 V or more held for 2 s. Electrical low and high faults are P0D3F and P0D40. Usually only charging is affected.

SystemPowertrain
Typegeneric / SAE
GroupP0
Range / numberD / 3E

Possible causes

  • Charger module software reacting to certain charging stations (GM BCCM update) high
  • Charging station or cord with unusual behaviour, quick re-plugging medium
  • Voltage measurement inside the on-board charger faulty medium
  • Faulty duty-cycle signal line between charger and controller (2016-2019 Volt) low

Symptoms

  • Charge incomplete or interrupted
  • MIL on (GM)
  • Problem appears only at certain charging stations

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for P0D3E

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)
  • 1 warning for driving and inspection(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication