P0D37
Hybrid/EV Battery System Current High
P0D37 records excessive current in the high-voltage battery system. Mitsubishi describes it for the 2023 Outlander PHEV: the PHEV-ECU watches the HV circuit for overcurrent whenever the car is ready or charging. Because such a current can damage the contact points of the contactors, the manual requires junction box No. 2 to be replaced, then asks whether the battery controllers, on-board charger, DC/DC converter, A/C unit, power drive unit or rear motor unit store a code, since one of them usually caused the surge; a recurring code within 20 minutes leads to the PHEV-ECU and the drive battery. Mitsubishi shows only the EV system warning, while Ford lists P0D37 with MIL and wrench lamp. Low current is P0D36; a sensor stuck high is P0AC2.
Possible causes
- Short or fault in an HV component (charger, DC/DC, A/C, inverter) high
- Contactor points damaged by the overcurrent (junction box) medium
- Damaged high-voltage cable low
- Hybrid control unit or battery fault (code returns) low
Symptoms
- EV or hybrid system warning, with MIL on some makes
- High-voltage system switches off, car not ready or not charging
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for P0D37
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
- 3 warnings for driving and inspection(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.